Super Dumbbell®
  +Super Dumbbell Cutter
    +SDK-300
    +SDK-500
    +SDMP-1000
    +SDMAK-1000, SDMBK-1000, SDMBK-1000N
  +Super Straight Cutter
    +SSP-105
    +SSK-1000
+SD Type Lever-Controlled Sample Cutter
+SD Type Compressed Air Sample Cutting Machine, etc.
+Light Weight Slab Forming Mold
+Labo Press
♢test Specimen Device
    +Model SDL-200-1AJ: Multipurpose Test Specimens Cutter
    +Model SDSC-1200 Series: Slitting Jig for Vulcanized Rubber Tear Test Specimen


SDAP-1200FBR / SDAP-1200FDR Under head type compressed air sample cutting machine
Moving caster and adjustment bolt for installation are equipped with frame - Solid type.

Diameter of ram of air cylinder: φ200 x 150(ST)㎜
Inside dimensions of room: Approx. (W)600 x (D)400 x (H)400㎜

Feature 1
Large materials can be cut in wide cutting room.
Transparent hoods are equipped around cutting room.
At front opening, area sensor by infrared rays or turn over type safety door is equipped for safety.

Feature 2
The cutting machine can cut wide ranges of soft/hard materials, thick materials, etc.

SDAP-100N Desk type compressed air sample cutting machine
Diameter of ram of air cylinder: φ200 x 100(ST)㎜
Inside dimensions of room: Approx. (W)500 x (D)400 x (H)400㎜

Feature 1
Designed compact (Desk type).
Reasonable price. Also, it has high output function.

Feature 2
Transparent hoods are equipped around cutting room.
【In option, area sensor by infrared rays or turn over type safety door can be equipped.】

SDAP-100NP Desk type compressed air sample cutting machine (Prepared for pipes)
Diameter of ram of air cylinder: φ200 x 100(ST)㎜
Inside dimensions of room: Approx. (W)500 x (D)400 x (H)400㎜
Work clamps (right and left) by compressed air system are equipped to fix a center of round surface
inside of a tubular material.
Feature 1
15(t)㎜ max. thickness of wall of tubular materials, can be cut.

Feature 2
Forced knockout mechanism for a sample is equipped.
As for the issue what it has been thought as difficult for a long time, we improved knockout mechanism for a remained sample after punched.
By the improved knockout mechanism, the sample can be instantly taken out from a die after punched.

Feature 3
Work clamp mechanism by compressed air is equipped.
In conventional method, there were many cases necessary to hold a work manually and therefore very dangerous operation were required.
However, by our clamp mechanism, it became possible to maintain the definite punching position safely and positively.

SDAP-1200FBGK Compressed air unvulcanized rubber cutting machine【Patent pending】
Moving caster and adjustment bolt for installation are equipped with frame - Solid type.
Bale size (MAX): Approx. (W)350 x (L)700 x (T)230㎜
Prepared for synthetic rubber, natural rubber, fluorine system unvulcanized rubber.

Diameter of ram of air cylinder: φ200 x 250(ST)㎜
Inside dimensions of room: Approx. (W)760 x (D)600 x (H)500㎜
Cutting cutter: Super Guillotine Cutter (one-piece blade),
Overall length of cutting edge: L = 510㎜ (replaceable)

Upper limit position of Super Guillotine Cutter and cutting edge receiving mechanism are interlocked (variable type).
As safety devices, transparent hoods are equipped around cutting room and infrared area sensor is equipped at front opening.

Feature 1
By the combination with Super Guillotine Cutter (replaceable blade cutter system), natural rubber, fluorine system bale, etc. can be cut statically by the lowest possible pressurized pressure which was not in conventional method.

Feature 2
Developed and designed compact for the use of laboratory, production line, etc.
It is possible to do small dividing work of bale safely and rationally.


Documents saved in PDF format, require you, the user, to have Adobe Reader® installed on your computer.
Click here to download the current version of Adobe Reader®

ATAP-1000N New type full automatic slab sheet cutting machine
Sizes of slab sheet: 150 x 150 x 2(t)㎜, with receiving stockcar 60 pcs. (max.) x 2 sets
Ranges of hardness of slab sheet: 30°~98° (Durometer A)
Prepared test specimen: JIS K6251, Types: 1, 2, 3 & 5 and JIS K6252 Crescent-shaped, Angle-shaped
Other various kinds of test specimen

Each drive part: By compressed air cylinder system and air sequence
Diameter of ram of air cylinder: φ180 x 200(ST)㎜
Control mechanism:
Programming controller - LCD (9 inches)
Outer setting mechanism: Air conditioning control (by LCD above-mentioned)
Power source: AC100V Single phase 50/60Hz 15A
Air supply pressure: 0.65MPa
Unit dimensions: Approx. (W)1300 x (D)650 x (H)1400㎜
Unit weight: Approx. 590kg

Feature 1
60 pcs. (max.) of slab sheets can be set in slab sheet supply stockcar. Also, another 60 pcs. of slab sheets can be set for standby in a spare stockcar.

Feature 2
After slab sheet was set, subsequent progresses are made automatically and cutting time is substantially shortened than that of conventional type.

Feature 3
Re-starting of program after emergency stop, continuous operation is possible as each movement is controlled separately.

Feature 4
After punched, at the time of taking out of test specimen, in order to minimize compression bonding phenomena between knockout plate and slab sheet, air system forced knockout mechanism is equipped which solves a trouble that seldom happens.

Feature 5
After punched, a test specimen is sucked by vacuum and transferred to collection box automatically by cylindrical trolley system.

SDAP-1183FBAT-PT Plastic full automatic test specimen cutting machine【Patent pending】
Air cylinder three-head system
Moving caster and adjustment bolt for installation are equipped with frame - Solid type

New JIS K7139:2009 based on ISO standards (ISO 20753) for plastic, has defined the tensile test specimens of three types of A1, A2 and A3. As they can be applicable to a wide range of applications, they are often referred to as multipurpose test specimens.
The feature of multipurpose test specimens is that test specimens are formed under the same conditions and are measured in the same state. It is said therefore, that the dispersion does not occur in the characteristic value of the test specimens to be obtained.

In the past, there was the impossible physically to obtain the test specimen for tensile test and other test specimen including for Izod and Charpy impact tests directly from cutting. If the test specimen could be obtained, it has many difficulties for standard specimen.
Therefore, in general, to obtain the test specimen, machine cutting method was only used as the effective means. But, in this preparation method, it needs much time. And also there were many difficulties such as physical influence to the test specimen due to friction heat to be happened at the time of cutting work, rough finish of cutting surface, problem in accuracy, the cost of equipment itself, etc.

This equipment is developed by us as the rational and ideal full automatic cutting equipment for making test specimen eliminating many such technical problems.
Also, in improving this equipment, epoch-making ideas in the means of making the standard test specimen and the technique of Super Dumbbell® (replaceable blade cutter system) which is our original products are combined.

Main cutting driving part: Dia. of air cylinder ram φ 180 × 100(ST)mm
3-stroke parallel arrangement system
Air working pressure: 0.15 ~ 0.75MPa
Sizes of work-table: 200 × 200mm
Work clamp mechanism: 2-parallel air-clamp (right & left) system
Outer control panel: Programmable terminal (LCD type 10.4 inches, color)
Programming controller: Omron’s CQM1-CPU43V1 equivalent

Operation mode (standard mode):
Mode A Tensile dumbbell-shaped
Mode B Prism-shaped, cutting pitch P=10mm

Obtaining numbers of test specimen (standard mode):
Mode A 5-test specimen
Mode B 10-test specimen

Cutters to be used (standard accessories):
  1. 1 set SDSPK-1001B-Du (right & left) & end cutter
  2. 1 set SSSK-1000-Du & end cutter

Cutting room: Equipped PVC (transparent) safety hood structure and 2-safety door.

Unit dimensions: Approx.(W)1500×(D)600×(H)1400㎜
Weight: Approx.450kg
Power Source: AC-100V Single phase 50/60Hz 5A

Special additional mechanism (Option)
  1. Addition of various cutting modes

  2. Temperature control (heating mechanism):
    Heating mechanism built-in by temperature control (2-system)
    1. Cutter side: AC-100V 400W
    2. Table side: AC-100V 500W
    Object of materials: PVC, PC, PS and other hard thermoplastics
    Temperature range: Room temperature ~ 199 ℃
    Control system: Digital system PID proportional control system



Documents saved in PDF format, require you, the user, to have Adobe Reader® installed on your computer.
Click here to download the current version of Adobe Reader®

SDAP-1200FD-TRPL Plastic almighty test specimen cutting machine
Work-table Movable Type
Turning Function (Automatic & Manual)
Parallel Transfer Function (Manual)

New JIS K7139:2009 based on ISO standards (ISO 20753) for plastic, has defined the tensile test specimens of three types of A1, A2 and A3. As they can be applicable to a wide range of applications, they are often referred to as multipurpose test specimens.
The feature of multipurpose test specimens is that test specimens are formed under the same conditions and are measured in the same state. It is said therefore, that the dispersion does not occur in the characteristic value of the test specimens to be obtained.

In the past, there was the impossible physically to obtain the test specimen for tensile test and other test specimen including for Izod and Charpy impact tests directly from cutting. If the test specimen could be obtained, it has many difficulties for standard specimen.
Therefore, in general, to obtain the test specimen, machine cutting method was only used as the effective means. But, in this preparation method, it needs much time. And also there were many difficulties such as physical influence to the test specimen due to friction heat to be happened at the time of cutting work, rough finish of cutting surface, problem in accuracy, the cost of equipment itself, etc.

In order to solve these technical problems, we already developed Plastic full automatic test specimen cutting machine, model: SDAP-1183-FBAT-PT, which combined our epoch-making ideas and our technic for our original products, Super Dumbbell® (replaceable blade cutter system), as the manufacturing equipment of standard specimen. So far, we have been selling many units of this equipment as rational and ideal cutting equipment.

SDAP-1200FD-TRPL PLASTIC ALMIGHTY TEST SPECIMEN CUTTING MACHINE utilizes excellent characteristic and technic of aforesaid Plastic full automatic test specimen cutting machine which is already developed by us and in addition this is newly developed cutting equipment which is equipped update cutting system based on the development philosophy of this equipment.

Main cutting drive part: Diameter of air-cylinder ram φ 200 × 100(ST)mm
Air working pressure: 0.15 ~ 0.65MPa
Size of work-table: Approx. 200 × 220mm
Usable up to 4.5(t)mm (MAX) thickness


Work-table rotation range: 0°~ 90 ° / 0 °~ 180 ° manual change
Work-table sliding part: Y axis (front and rear) LM linear guide and thrust bearing mechanism
Transfer stroke: 120mm by manual handle (2.0mm / turn)
Transfer distance display: Linear scale, liquid digital 5 digits display (3-integer / 2-decimal)


Work-table turning function is equipped.
: As work-table turns, you can use one die-set for a general-purpose.

Size of sheet:
  1. Dumbbell-shaped (JIS K7139 type-A2 or type-A3): (W)35 × (L)170mm
  2. Rectangle-shaped (JIS K7139 type-B3 and others): (W)200 × (L)200mm

Cutter to be used (standard accessories):
  1. SDSPK-1001B-Du: Dumbbell-shaped
  2. SSSK-1000S-Du: Rectangle-shaped

Equipped around cutting room: PVC transparent safety hoods are installed (at right & left and backside)
Front opening:
Turn over type safety door is installed (PVC made).
During it opens, circuit of main cutting drive is cut off.
Unit dimensions: Approx. (W)800 × (D)750 × (H)1150mm, or 1450mm
Unit weight: Approx. 250Kg
Power source: AC-100V Single phase 50/60Hz 5A

Special additional mechanism (Option)
  1. Infrared area sensor mechanism: Front opening (safety mechanism)

  2. Temperature control (heating mechanism):
    Heating mechanism built-in by temperature control (2-system)
    1. Cutter side: AC-100V 400W
    2. Table side: AC-100V 500W
    Object of materials: PVC, PC, PS and other hard thermoplastics
    Temperature range: Room temperature ~ 199 ℃
    Control system: Digital system PID proportional control system



Documents saved in PDF format, require you, the user, to have Adobe Reader® installed on your computer.
Click here to download the current version of Adobe Reader®

SDAP-1160FAT-PT Brittleness temperature test specimen automatic cutting machine (Prepared for New JIS)
Dimensions of test specimen
  1. ISO 974 (2000), JIS standard (provisional): (W)2.5 ± 0.05 × (L)20 ± 0.25 × 2(t)mm
  2. JIS K7216 A-shaped (currently JIS), ASTM D746: (W)6.0 ± 0.4 × (L)38.0 ± 2.0 × 2.0(t)mm

Other prepared test specimens
  1. JIS K7139 type-B3 test specimen: (W)10 × (L)80 × 4(t)mm
  2. JIS K6774, ASTM D1693 stress cracking test specimen: (W)13 × (L)38 × 2(t)mm
  3. Other various kinds of rectangle and square-shaped test specimens

Materials to be cut: PP, PE, others

Cutting drive part:
Diameter of ram of air cylinder: φ160 x 75(ST)㎜
3-position type (middle position is for standby type)

Automatic work clamp: Diameter of ram of air cylinder: φ50 x 10(ST)㎜
Sliding drive part of work-table: Pulse motor, 5-phase stepping motor

Control mechanism:
Driver for controlling, programming controller, programmable terminal (LCD) and combination by other air sequence mechanism

Outer setting operation panel: Programmable terminal (LCD) 5.7 inches

Cutting room: Transparent hoods are equipped at right, left and backside. Safety door is equipped in front.

Unit dimensions: Approx. (W)750 x (D)500 x (H)1400㎜
Unit weight: Approx. 250kg
Power source: AC100V Single-phase 50/60Hz 5A
Air supply pressure: 0.65MPa

Dimension of Brittleness temperature test specimen stipulated by ISO 974/JIS standard is extremely microscopic size and strict allowable accuracy is defined. Also, numbers of test specimen to be put on the clamp are many [1 shot = 15 pcs. x numbers of brittleness destroy temperature point].
Therefore, it is necessary to make a large quantity of test specimen.
From this point of view, the biggest problem to be solved was to shorten the necessary time for making the test specimen and to obtain more accurate test specimen.

This cutting machine was developed to satisfy these purposes completely.
In addition, this cutting machine is combined with manufacturing function to make other various kinds of test specimen. Therefore, this is multi-functioning type automatic cutting machine which can be used for wide ranges.


HOME | About us | Products | Agents in overseas | Contact us | Topics | Download | Related Links

DUMBBELL CO., LTD.
Head office:2243-1,Kasahata,Kawagoe-Shi, Saitama-Ken, Japan
TEL. +81 49 232 1550 (Operator) FAX:049-233-5242
FAX. +81 49 233 5242
Copyright (C) DUMBBELL CO., LTD. All Rights Reserved.
Privacy policy | Copyright